The New Phoenixtech GT9 - Promotion price!

'It has the MEMS sensor dead-band sensitivity adjustment capability.'

'It is a very simple, tolerant 'plug and play' gyro for beginners. The gyro works superbly right out of the box due to its innovative simple TX set-up method.'

'Experts can then fine tune the gyro via a full range of advanced adjustment parameters. All the advanced parameters are accessed via a revolutionary TX set-up method. Adjustments can be made and flight tested without having to re-boot the gyro. No hidden costs: like interface / lap top, expensive control box or any further product is required!'

Comments from Asid, Llama Feed:

'The quality of the unit is very high...This sensor should allow better temp calibration and less drifting as well as better sensitivity.'

'Use the transmitter sticks to programme. I won't bore you with the details, lets just say anyone can do it!'

Key features:

• The latest MEMS technology
• Up to 1080˚/s controllable rotation rate
• Supporting all tail servos (760us and 1520us)
• Offers 60Hz, 250Hz, 333Hz and ultra-high 560Hz servo frame rates
• Designed for all helicopters; from the smallest electric to the largest nitro
• Fully programmable
• Small and lightweight
• Dual operating modes; AVCS (heading lock) and Rate
• Superior tail hold power and pirouette consistency

Specification - Click here for the manual

• Size: 23mm x 23mm x 7mm
• Weight: 8g (14.8g with wires)
• Sensor: MEMS Dual Range
• Voltage: 4.8v/6v DC
• Current: 35mA
• Temperature: -10˚C to 50˚C
• Rate Range: +/-1200˚/S
• ADC: 12 Bit
• Arithmetic: PID
• Servo Signal:
  • 1520us
    • 60Hz (analog)
    • 250Hz
    • 280Hz
    • 333Hz
  • 760us
    • 560Hz (narrow)

Watch these new flight Videos courtesy of Stefan Simmons!

Tested in both smaller sized electric helicopters and 700 size nitro helicopters, providing exceptional performance in both!