|
Designed to give un-compromised quality and 3D performance
Features
- Light weight design providing full on flight performance and extreme 3D capability
- Main frames assembled using glass fibre
- 120 degree CCPM aluminium swashplate
- Aircraft grade aluminium main rotor housing
- Aircraft grade aluminium main rotor holder
- Aircraft grade aluminium washout base
- Main drive gear with cooling fan
- Striking painted glass fibre canopy
- 425mm glass fibre Main Blades
- Comes ready built with 500size aluminium case
Specification
Airframe
- Length: 850mm
- Height: 310mm
- Main blade length: 425mm
- Main rotor diameter: 970mm
- Tail rotor diameter: 200mm
- Motor pinion gear: 12T/13T
- Main drive gear: 162T
- Autorotation tail drive gear: 145T
- Tail drive gear: 31T
- Drive gear ratio: 1:13.5:4.68/1:12.46:4.68
- Flying weight: approx 1700g
Power system
- Out-runner Brushless Motor (AKE IceCold 500R 1400W)
- Brushless ESC 60A
- Cyclic Servos (Flasher S501)
- Tail Servo (Phoenixtech DS502C)
- GT400 head lock Gyro
- 2x 2200mah/11.1V/20C lipo battery with a Y lead
- Balance charger with main adaptor
- 2.4G Computerize 6 channels Radio and full range Receiver(only come with RTF opinion)
- Packed in 500 size aluminium case
Additional equipment required to complete this helicopter:
RTF(ready to fly): Complete but please disable the idle up in the radio supplied if you are not flying 3D.
ARTF(almost ready to fly,need Tx&Rx): you will need a 6 channel Radio and receiver. (We suggest either DX6i or DX7 from Spektrum)
| RTF or ARTF | |
|
