|
The perfect introduction Designed as an entry level 3D machine Features - Super light
- Glass fibre main frames for rigidity
- 120 degree CCPM aluminium swashplate
- Aircraft grade aluminium main rotor housing
- Aircraft grade aluminium washout base
- Main drive gear with cooling fan
- Careful blend of plastic and aluminium component to provide smoother control
- High discharge rate Lithium polymer battery 3 Cell 1800mah 20C
- High performance motor and speed controller ( specification in motor section)
- Upgrading possible using Flasher parts as skill levels advance.
- Supplied assembled in aluminium Case for trouble free handling
Specifications -
Length: 650mm -
Height: 230mm -
Main blade length: 325mm -
Main rotor diameter: 700mm -
Tail rotor diameter: 150mm -
Motor pinion gear: 12T/13T -
Main drive gear: 150T -
Autorotation tail drive gear: 106T -
Tail drive gear: 25T -
Drive gear ratio: 1:12.5:4.24/1:11.5:4.24 -
Flying weight: approx 800g Power system -
Brushless Motor 2212 KV1400 -
Brushless ESC 30A -
9g servos -
GT400 head lock Gyro -
1800mah/11.1V/20C lipo battery -
Balance charger with main adaptor Additional equipment required to complete this helicopter: RTF(ready to fly): please disable the idle up in the radio supplied if you are not flying 3D. ARTF(almost ready to fly,need Tx&Rx): you need a 6 channel Radio and receiver. (We suggest you choose a computerised radio)
| RTF or ARTF | |
|
